
PETG PLUS
-
Color
-
-
Diameter
- 1.75mm
- 2.85mm
-
Weight
- 1kg
隐藏域元素占位
PETG PLUS 3D printing wire is a high-performance upgraded material that achieves multidimensional reinforcement on the basis of traditional PETG. Its core features are as follows:
1. Super toughness: The elongation at break exceeds 250% (ASTM D638 standard), and the impact strength is 1.8 times that of ordinary PETG;
2. High temperature tolerance: The HDT thermal deformation temperature is increased to 85 ℃, and it can withstand an environment of 100 ℃ without deformation in the short term;
3. Zero defect printing: The exclusive modified formula reduces the shrinkage rate to 0.3%, completely solves the problem of warping, and supports printing in large sizes of 500mm;
4. Medical grade safety: Passed ISO 10993 biocompatibility certification and meets FDA food contact standards;
5. Intelligent optimization:
-Low temperature printing compatibility (210-230 ℃)
-35% increase in interlayer bonding strength
-Comes with a matte textured surface
(Note: Especially suitable for high demand fields such as functional prototypes, automotive components, and medical equipment)
★ Printing Parameters
·Filament Diameter: 1.75mm
·Tolerance: ±0.05mm
·Printing Parameters
1.Long-distance Wire Feeding Printing
·Printing Temperature: 230-245℃
·Heated Bed Temperature: 50-60℃
·Printing Speed: 30-40mm/s
·Retraction Distance: 0-6mm/s
·Retraction Speed: 45-80mm/s
·Idling Speed: 70-100mm/s
2.Short-distance Wire Feeding Printing
·Printing Temperature: 230-245℃
·Heated Bed Temperature: 50-60℃
·Printing Speed: 30-40mm/s
·Retraction Distance: 0-6mm/s
·Retraction Speed: 45-80mm/s
·Idling Speed: 70-100mm/s
·Net Weigh: 1KG/ roll
·Gross Weight: 1.3KG/ roll
·Length:1.75MM(1KG)=325M
2.85MM(1KG)=125M











You May Like
Want To Know More?
Tell us more so we can connect you with the right person for your request. We respects your privacy and will only use your personal data to respond to your enquiry.